How to Troubleshoot Common 3D Printing Problems

Troubleshooting Common 3D Printing Problems

Many 3D printer owners face problems when they try to get the best results. Whether it’s due to the wrong settings, inappropriate cooling, or a faulty model, these issues can be frustrating and even cost you time and money.

However, there are some things that you can do to troubleshoot some of the most common issues. Hopefully, this guide will help you find the solution you’re looking for!

Layer Adhesion Issues

Layer Adhesion Issues occur when the layers of a 3D print do not bond well enough, leading to cracks or splits in the finished part. It is important to know how this occurs and what to do to resolve it so that your prints can be as smooth and professional looking as possible.

One of the most common causes of this problem is that your printer is printing too quickly. If your print speed is too high, the extruded plastic will not have time to bond to the previous layer. Fortunately, lowering your print speed in 5mm/s or 10mm/s increments can help resolve this issue.

Another common cause of poor layer adhesion is that your hot end is not heating up the filament adequately. If the filament is not heated to the temperature recommended by the manufacturer, the successive layers will not bond with each other and the final part may break.

You can easily test this by adjusting the print temperature until the part bonds to the previous layer. This can be done in 5-10degC increments until you find the ideal temperature.

Alternatively, you can print the same model at different speeds to see how each affects the final result. This will allow you to pinpoint the optimum printing speed for your specific setup and ensure that each part bonds properly.

Many popular slicers include tools to help you improve your layer adhesion. These tools include rafts and brims that help the print adhere to the bed. These are especially useful for making the first layer of your print more adherent to the surface of the print bed.

When printing with PLA, you should always make sure that your first layer is as uniform and smooth as possible. Rough first layers can often be solved by ensuring that the nozzle is set correctly for the height of the build plate and that it is leveled.

If the nozzle is too close to the build plate, it can catch on the previously deposited material and create unsightly mounds and peaks that can ruin the look of your first layer. This is especially the case if the build plate is not flat, but a simple adjustment can correct this.

Under-Extrusion

Under-Extrusion is one of the most common 3D printing problems and is usually caused by a number of factors. Luckily, there are several things you can do to troubleshoot this issue and get back to making awesome prints!

First, you’ll want to make sure your nozzle is clean and free of any clogs. This is easily accomplished by using a brush to remove any dirt or debris on the nozzle.

Second, you’ll need to check that your printer is heating the material at the proper temperature. Too low or too high a temperature can cause a variety of issues, including under-extrusion.

Third, you’ll need to make sure the filament you’re using is of a good quality. If you’re printing with a low-quality filament, the extruder will struggle to push the material through the nozzle.

Another potential problem is that your filament may not have the correct diameter. This can happen when you’re using a spool that’s too small for your printer, or if your slicer doesn’t support the right diameter of your filament.

If this is the case, you’ll need to re-spool the material or purchase a new spool from a different brand. Both of these actions will allow you to ensure the material is of a quality that’s compatible with your printer.

Additionally, you’ll want to make sure that the material’s density is correct. If the material is too thick, it will block the nozzle and cause under-extrusion.

Finally, you’ll need to make sure that your retraction settings are set properly. Retraction allows the printhead to pull back a bit of the filament before it travels, which can help prevent oozing and stringing. Retraction can also help reduce the amount of material that gets left behind during the printing process, which can result in under-extrusion.

If you’re still having issues with under-extrusion, you can try increasing the flow rate of your slicer (also known as the extrusion multiplier). This will force more filament through the nozzle, so you’ll see more extruded material.

Over-Extrusion

Over-extrusion is one of the most common 3D printing issues and can be caused by a number of different factors. This can range from thermoplastic filament settings and print temperature to flow rate parameters.

It can also be caused by a number of hardware defects. This can include a worn-out nozzle or improperly calibrated extruder steps.

Fortunately, there are a few simple things you can do to troubleshoot over-extrusion. For instance, you can lower your printing temperature in 5-10degC increments or you can tweak your extruder step settings to reduce over-extrusion.

Another way to fix over-extrusion is to make sure you are using the right size of filament for your printer. There are a few standard diameters of filament on the market, including 1.75mm, 2.85mm, and 3mm. If you slice your model considering a larger diameter of filament than the actual size, you will get over-extrusion.

Once you have determined the correct size of filament, it’s important to calibrate your flow rate with it. This can be done by measuring your model’s wall thickness and calculating the flow rate of the resulting layer.

This can be a difficult task for many printer owners, but it is incredibly important. Ultimately, it is the best way to ensure accurate prints without any over-extrusion.

If you are experiencing over-extrusion, you may need to adjust your flow rate settings in Cura or Simplify3D. The flow rate setting is a multiplier that determines the amount of filament that your printer pushes out.

The multiplier value should normally be about.95 for PLA and a little higher for ABS. You can check the current value of your flow rate in Cura or Simplify3D by clicking on the Flow tab.

Alternatively, you can use a pair of calipers to measure your filament’s diameter and manually lower the flow rate. This will make the printer adjust to a more accurate range of flow rates.

Over-extrusion can be a frustrating issue that can lead to poor-quality prints. It can also ruin the outer dimensions of your finished print, causing it to look warped or uneven.

3D Ghosting

3D printer ghosting is an issue that can occur in 3D printing when two or more layers of the same material are printed on top of each other. It is caused by a jump in the Z-axis of the 3D printer, resulting in the same layer being printed multiple times. This can lead to a blurred or ghosted look on the printed object.

You can help resolve this problem by turning off unnecessary devices or programs running on your computer. This will lower the temperature on your machine and allow it to refresh faster. If this doesn’t solve the issue, try disabling some other things that can slow down your computer’s response time and refresh rate, such as noise reduction or motion smoothing.

In conclusion, 3D printing can be a very rewarding and enjoyable experience. However, it can also be plagued with common problems like layer adhesion, under-extrusion, over-extrusion, and ghosting. By understanding how each problem occurs, you can better troubleshoot it and get back to making awesome prints.

 

About the Author: Julie Souza

Leave a Reply

Your email address will not be published. Required fields are marked *